Nozzle Tubes for Precision Dispensing
Nozzle tubes dispense product through a narrow tip rather than a wide open orifice, giving the user a controlled stream or bead instead of a flat pour. They are a common choice for thinner gels, serums, adhesives, ointments, and liquid formulas where accurate placement matters more than volume per squeeze.
The gallery below shows our standard nozzle head shapes and the diameters each is available in. If your formula is thicker or you need a different dispensing action, take a look at our pump tubes, twist off tubes, or the full common tube types overview. Need a shape that is not shown here? Visit custom designs.
Nozzles
N-20 | 50mm
N-01 | 13, 16, 19, 22, 25, 30, 35, 38, 40mm
N-09 | 19, 20mm
N-03 | 13, 16, 19, 22, 25mm
N-01 | 13, 16, 19, 22, 25, 30, 35, 38, 40mm
N-13 | 30, 35, 45mm
N-12 | 19, 22, 25mm
N-17 | 35, 40mm
N-05 | 19, 22, 25mm
N-11 | 19,22mm
N-10 | 19, 22mm
N-04 | 16, 19mm
N-14 | 19, 22, 25mm
N-19 | 40mm
N-18 | 35mm
N-15 | 25, 30, 35, 40mm
N-06 | 19, 22mm
N-02 | 13, 16, 19, 22, 25mm
N-08 | 19mm
N-16 | 30, 40mm
Nozzle Tube FAQs
What products work best with nozzle tubes?
Nozzle tubes suit thin to medium viscosity products such as serums, gels, adhesives, lubricants, and ointments where controlled, precise dispensing is important.
What orifice diameters are available?
Diameters vary by nozzle shape, generally ranging from about 13mm to 40mm. Check the diameters listed under each style above, and we can confirm exact fit for your cap or applicator.
Can nozzle tubes be sealed for tamper evidence?
Yes, nozzle tubes can be produced with an induction seal or tamper-evident membrane under the cap, common for pharmaceutical and cosmetic applications.
What materials are nozzle tips made from?
Nozzle tips are typically molded from the same polyethylene used in the tube body, or produced as ABL or PBL laminate for products needing a stronger barrier.